Aircraft & Aerospace
LK Metrology has been active in the aviation industry since the late 1960’s and has pioneered state-of-the-art technology ever since.
From the development of the first touch-trigger probe to custom-developed software, our strong aviation pedigree has made LK Metrology a key player supplying major propulsion systems, critical structural components, and panel OEMs throughout the world.
Aerospace Components
Aerospace components and systems are critical in air transportation. Even the smallest geometry and alignment deviations can cause energy conversion problems and blade failure.
LK Metrology provides high-accuracy CMMs supporting a variety of multi-sensor technologies and software, to satisfy the requirements of the most advanced component manufacturers.
Contact us for more information about:
- Aerospace engine blade inspection
- Aerospace engine blisks
- Aerospace structures, casings, blades
- Airplane engine casings
- Blade inspection analysis
- Blade sections and complete aerofoil
- Guide vanes cooling holes
- Inspection of aircraft and aerospace components
- Oversized blades
- Turbine blades
Park Engineering
A member of the tooling division within the Hyde Group in the North of England, Park Engineering specializes in the design, manufacturing, assembly, and certification of tooling jigs, fixtures and large components for the aerospace, nuclear, defense and automotive sectors.
In day-to-day operation, the ALTERA M CMM supports the inspection of large parts with drawing tolerances of typically ± 50μm, but is sufficiently accurate to measure smaller parts down in the 10 μm region. Irrespective of tolerances, LK’s software application CAMIO with its user- friendly operator interface allows CNC programs to be generated either online or off-line for the inspection of batch quantities, further reducing inspection time and cost, especially when CAD models are available.
Quality Manager Will Reeves commented, “Across the broad spectrum of work packages, we have access to CAD models approximately 50-60% of the time, with the remainder being work to print. However, the provision of CAD models is something we are always encouraging our customers to provide, as it minimizes the risk of incorrect data being entered due to human error during the programming process.” He concluded, “LK’s CAMIO software also saves time by automatically generating comprehensive reports that we are able to send to our customers with inspected components. Click below to download and read the full case study!
AIRCRAFT COMPONENTS
Absolute component accuracy, traceability and reliability are vital to air transportation.
LK Metrology CMMs are used throughout the industry to perform complex inspection cycles on landing gears, actuator assemblies, braking systems, thrust reverser components and other critical components.
Our wide range of CMM sizes allow the inspection of virtually any component. LK Metrology has even delivered the world’s largest custom ceramic CMM. Like most of our CMMs, it supports multiple probing technologies (contact triggering, non-contact laser scanning, and hybrid).
Contact us for more information about:
- Advanced composite materials and structures
- Aerospace structures
- Aero structures casings and blades
- Aircraft and aerospace components
- Aircraft and aerospace structural components
- Aluminum alloy fuselage structures
- Aluminum components
- Deep bore measurements
- Hydro formed tubes sheet metal and plastic components
- Inspection of printed parts
- Structural components
BIOMEDICAL
Produced to extremely high-quality standards, medical devices often require rapid, accurate, and non-destructive testing of expensive components and unique implants.
LK Metrology offers high-volume CMMs as well as high-performance reverse-engineering systems, and non-contact laser scanning solutions for custom medical components including knee implants, hip implants, hearing aids, and medical instruments.
The accurate shapes of these components are crucial for fast patient recovery, comfort, and cost. LK Metrology‘s software and sensor solutions are a well-established benchmark in this specialty segment.
Implant Manufacturing
LK Metrology delivers high-accuracy metrology solutions for implant manufacturers. Our CMMs are flexible enough to perform rapid dimensional inspection and reverse engineering of medical implants in additive manufacturing, as well as standard and custom-designed orthopaedic implant inspection for reconstructive surgery.
This includes the ability to perform hybrid inspections where non-contact scanners are used for smaller features and delicate parts, and touch probes are used for internal geometry.
LK Metrology CMMs and software also enable complete Surface-to-CAD comparison using color map deviations reports for superior dimensional insight.
Contact us for more information about:
- Additive manufactured medical implant
- Orthopaedic implants for reconstructive surgery
Medical Instruments
LK Metrology helps medical instrument manufacturers to achieve deep insight, higher throughput, quality, accuracy and efficiency through cost-effective metrology solutions. Our metrology inspection technology is frequently used in the production of surgical suture needles and medical plastic and rubber components.
WLR Precision
To enable production operators and quality inspectors at WLR Precision Engineering to operate their new LK coordinate measuring machines (ALTERA S 15.10.8 and ALTERA S 10.10.8) and access the measurement reports easily, the machines have been supplied with LK Launchpad, an icon-driven, touch-screen operator menu, and a network of viewing screens and tablets.
The simplified operator menu lists all the available inspection programs and the exact position the part should be placed on the machine table for inspection, giving operators the confidence to perform measurement tasks in just a few clicks. It greatly enhances flexibility and opens-up the system for use by non-specialist CMM operators. Measured results and automatically generated reports may be shared between screens, tablets and other networked devices for easy access and viewing from any location. Click here to read more!
Molded Components
From medical packing machines to plastic injection consumables, LK Metrology CMMs are frequently used in a variety of settings for metal and plastic molding. Equipped with contact probing and non-contact laser scanners, our CMMs help manufacturers accurately inspect and troubleshoot the most fragile moulded components.
Contact us for more information about:
- Metal and plastic molded parts
- Plastic injection molded medical components
- Plastic injection molded medical consumables
Alltrista Plastics
Alltrista Plastics was looking to upgrade their existing CMMs because they had become inefficient at their Christchurch, UK factory. Specializing in plastic injection molding of devices typically found in the medical, pharmaceutical and nutraceutical industries, Alltrista decided to upgrade its quality room and ultimately decided on the installation of two ALTERA S 10.7.6 CMMs equipped with LK’s CAMIO software and PH10M motorized indexing heads with SP25M scanning probes.
“What finally clinched our decision to opt for LK were the knowledgeable sales engineers, the firm’s reputation for good after-sales service and the favorable price of the equipment,” states Peter Makosa, Quality Manager at Alltrista Plastics. Click below to download and read the case study on how LK Metrology and Alltrista Plastics have teamed up for success!
Prosthetic Device
Replacement Joints
Energy And Power
The energy production, transformation and transportation sectors cannot function without critical components meeting stringent quality standards. LK Metrology provides solutions for the precise dimensional inspection of critical components including parts used in wind power generation towers, turbine blades, turbo chargers, impellers, hydraulic pumps, compressor screws…
Turbines
LK Metrology CMMs are used by power generation component manufacturers to inspect gas-fuelled turbines, steam turbines, various machinery and steel die forgings. Used in both manufacturing and R&D settings, our CMMs feature contact and non-contact probing options that ensure high accuracy, speed, and flexibility.
Our CMM systems can work as standalone, rapidly reprogrammable R&D/reverse engineering units or be integrated into fully automated Industry 4.0 production lines with robot loading and data analytics.
Contact us for more information about:
- Gas Fuelled Turbines
- Steam Turbines
- Turbine Castings Machining
- Steel Die Forgings
Cross Manufacturing
CMM controller Retrofit from LK Metrology enables multi-sensor inspection.
Two coordinate measuring machines built by LK Metrology in 1997 and 2007 for Cross Manufacturing, were upgraded by retrofitting multi-wired NMC300 controllers with updated firmware and software. Because of the scope of the project, two Renishaw PH10MQ probe heads were fitted to take advantage of the ability to deploy different types of sensors in addition to touch-trigger probes.
As a result of the improvements, the sealing design and manufacturing specialist has immediately gained the ability to use the Renishaw SP25M tactile scanning probe it has purchased, which it is hoped will cut metrology cycle times by at least one-third when implemented in early 2024. To read more about Cross Manufacturing and LK Metrology teaming up for success, click the link below or click the button below to download the case study!
Electric Motors
Nuclear and sustainable
Electronics
LK Metrology’s deep expertise in electronics led to the development of the first computer-controlled CMM, the first microprocessor-controlled drive system, the industry’s first touch trigger sensor (with Renishaw), and subsequently the first software-controlled CMMs. With over 60 years of experience in manufacturing precision measurement tools, LK Metrology assists semiconductor and consumer electronics manufacturers in resolving the most complex metrology challenges.
Consumer Electronics
LK Metrology coordinate measurement machines are being used throughout the consumer electronics sector to measure components for audio and telecommunications systems, displays, smartphones, luxury watches, camera lenses, and household electronic appliances.
We provide a full range of metrology solutions including:
- Non-contact laser scanning for fragile parts/materials
- Accurate multi-sensor metrology. Example: touch probes are used for internal features, cross scanners for surface features and cross scanners in single-line-mode for high-speed surface scanning
- Measurement of multiple features in a single scan
Industrial Electronics
Automotive & Land Transportation
LK Metrology is a high-accuracy precision measurement solution provider for major automotive and land transportation OEMs. Our legacy includes the design, production, and delivery of the world’s largest moving bridge CMM and the world’s first horizontal arm CMM. From powertrain to sheet-metal applications, our metrology solutions are used throughout the industry to ensure safety and quality standards are met.
Car Body & Panels
With 50+ years of metrology experience in the automotive sector, LK Metrology offers a wide range of solutions to accurately measure sheet-metal panels, part assemblies, sub-assemblies, holes, gaps and slots.
Our CMMs can operate independently or fully integrated in automated production lines to gather and process surface data in contact, non-contact and combined modes. Collected data can then be visually compared with CAD models to provide insight on measured surfaces and geometry deviations.
Contact us for more information about:
- Automotive flush & gap
- Automotive plastic injection moulding components
- Interior & exterior automotive trim
- Automotive trim & plastic components
- Body-in-white inspection
- Automotive panels tooling & forming inspection
- Blow moulded plastic fuel systems
- Fragile automotive parts
- Core component inspection
- BIW inspection & virtual assembly
- Automated automotive inspection
Lotus
The most accurate Lotus car ever, thanks to cutting edge metrology.
The latest sports car, the Emira, is by far the most accurate model ever built by Lotus thanks to an upgrade in quality control at the company’s sports car factory in Hethel, Norfolk, UK. The 5-axis HC-90TR twin arm CMM provided by LK Metrology allows for non-contact dimensional inspection at production-line speed, enabling real-time quality control. The CMM completes automated measuring cycles so quickly that it is able to keep up with the production line. To learn more about how Lotus and LK Metrology have teamed up for success, click below to read or download the full case study!
Read the Lotus case study here!
Powertrain
LK Metrology CMMs are equipped with ceramic tables to improve stability, stiffness, weight, and thermal properties.
Our CMMs can also be equipped with a wide range of contact and non-contact sensors to measure engine and transmission components, geometrical parts, suspensions, wheels, and other components with strict dimensional and form tolerances.
Our accompanying software allow users to process measured data and display graphic CAD-to-component comparisons for visual deviation analysis.
Contact us for more information about:
- Pressure die cast transmission casings
- Automotive transmission gearbox & casing
- High performance engine, gearbox & suspension components
- Automotive turbo chargers
- Automotive wheel & engine sensors
- Castings machining
- Automotive electrical motors
- Automotive closing systems
- Automotive engine & transmission pumps
Driven Precision Engineering
Driven Precision Engineering LTD, a subcontract company that is involved in Formula 1 racing and other sectors such as the aerospace and automotive industries, decided to purchase an ALTERA C 10.7.7 from LK Metrology to improve component inspection procedures and quality reports. Typical components, all machined from solid aluminum, include race car wheels, impellers, aircraft fuel pumps, and much more.
Owner Ray Harris states, “LK seems to be one of the metrology industry’s best-kept secrets,” and “I got the impression that I would receive good support and back-up, which so far has been the case. In addition, the CMM is well-built, and the software provided is easy to use, including on the portable arm.”
AUTOMATION
Ever since the integration of the first electronics and IT solutions into production lines in the 1970s, manufacturers have been working towards achieving higher levels of efficiency through process automation. Industry 4.0 builds on this trend by leveraging the vast amounts of data that can be captured and processed on a production line. LK Metrology’s precision measurement solutions are designed with automation in mind. Our CMM systems gather and process measurement data to ensure optimum productivity. product quality and resource utilization.
In-Line Metrology
Our in-line metrology solutions help manufacturers achieve high levels of automated quality, productivity, and efficiency. Our CMMs are designed to inspect components and determine corrective actions 24 hours per day without the need for a CMM operator.
Our systems can integrate with the following:
- CNC machine tools
- Transfer systems
- Robot handlers
- Programmable Logic Controllers (PLC)
- Material planning
- Safety systems
- Wash plants
Standalone Metrology
LK Metrology CMMs and software are suited to semi-automated production lines where user input is required to initiate the measurement sequence. Our systems are equipped with various personnel presence detection devices and other safety equipment to ensure safety while the CMM is being used. Our CMMs can also be fitted with pallet systems for quick and easy loading/unloading of components and automatic part recognition. Beyond the CMM’s main monitor, users can also be alerted via text message, PC dashboard, wireless, visual, and audio alerts to ensure they are always informed of the status of their CMM.
Aircraft & Aerospace
LK Metrology has been active in the aviation industry since the late 1960’s and has pioneered state-of-the-art technology ever since.
From the development of the first touch-trigger probe to custom-developed software, our strong aviation pedigree has made LK Metrology a key player supplying major propulsion systems, critical structural components, and panel OEMs throughout the world.
Aerospace components and systems are critical in air transportation. Even the smallest geometry and alignment deviations can cause energy conversion problems and blade failure.
LK Metrology provides high-accuracy CMMs supporting a variety of multi-sensor technologies and software, to satisfy the requirements of the most advanced component manufacturers.
Contact us for more information about:
- Aerospace engine blade inspection
- Aerospace engine blisks
- Aerospace structures, casings, blades
- Airplane engine casings
- Blade inspection analysis
- Blade sections and complete aerofoil
- Guide vanes cooling holes
- Inspection of aircraft and aerospace components
- Oversized blades
- Turbine blades
Park Engineering
A member of the tooling division within the Hyde Group in the North of England, Park Engineering specializes in the design, manufacturing, assembly, and certification of tooling jigs, fixtures and large components for the aerospace, nuclear, defense and automotive sectors.
In day-to-day operation, the ALTERA M CMM supports the inspection of large parts with drawing tolerances of typically ± 50μm, but is sufficiently accurate to measure smaller parts down in the 10 μm region. Irrespective of tolerances, LK’s software application CAMIO with its user- friendly operator interface allows CNC programs to be generated either online or off-line for the inspection of batch quantities, further reducing inspection time and cost, especially when CAD models are available.
Quality Manager Will Reeves commented, “Across the broad spectrum of work packages, we have access to CAD models approximately 50-60% of the time, with the remainder being work to print. However, the provision of CAD models is something we are always encouraging our customers to provide, as it minimizes the risk of incorrect data being entered due to human error during the programming process.” He concluded, “LK’s CAMIO software also saves time by automatically generating comprehensive reports that we are able to send to our customers with inspected components. Click below to download and read the full case study!
Absolute component accuracy, traceability and reliability are vital to air transportation.
LK Metrology CMMs are used throughout the industry to perform complex inspection cycles on landing gears, actuator assemblies, braking systems, thrust reverser components and other critical components.
Our wide range of CMM sizes allow the inspection of virtually any component. LK Metrology has even delivered the world’s largest custom ceramic CMM. Like most of our CMMs, it supports multiple probing technologies (contact triggering, non-contact laser scanning, and hybrid).
Contact us for more information about:
- Advanced composite materials and structures
- Aerospace structures
- Aero structures casings and blades
- Aircraft and aerospace components
- Aircraft and aerospace structural components
- Aluminum alloy fuselage structures
- Aluminum components
- Deep bore measurements
- Hydro formed tubes sheet metal and plastic components
- Inspection of printed parts
- Structural components
BIOMEDICAL
Produced to extremely high-quality standards, medical devices often require rapid, accurate, and non-destructive testing of expensive components and unique implants.
LK Metrology offers high-volume CMMs as well as high-performance reverse-engineering systems, and non-contact laser scanning solutions for custom medical components including knee implants, hip implants, hearing aids, and medical instruments.
The accurate shapes of these components are crucial for fast patient recovery, comfort, and cost. LK Metrology‘s software and sensor solutions are a well-established benchmark in this specialty segment.
LK Metrology delivers high-accuracy metrology solutions for implant manufacturers. Our CMMs are flexible enough to perform rapid dimensional inspection and reverse engineering of medical implants in additive manufacturing, as well as standard and custom-designed orthopaedic implant inspection for reconstructive surgery.
This includes the ability to perform hybrid inspections where non-contact scanners are used for smaller features and delicate parts, and touch probes are used for internal geometry.
LK Metrology CMMs and software also enable complete Surface-to-CAD comparison using color map deviations reports for superior dimensional insight.
Contact us for more information about:
- Additive manufactured medical implant
- Orthopaedic implants for reconstructive surgery
LK Metrology helps medical instrument manufacturers to achieve deep insight, higher throughput, quality, accuracy and efficiency through cost-effective metrology solutions. Our metrology inspection technology is frequently used in the production of surgical suture needles and medical plastic and rubber components.
WLR Precision
To enable production operators and quality inspectors at WLR Precision Engineering to operate their new LK coordinate measuring machines (ALTERA S 15.10.8 and ALTERA S 10.10.8) and access the measurement reports easily, the machines have been supplied with LK Launchpad, an icon-driven, touch-screen operator menu, and a network of viewing screens and tablets.
The simplified operator menu lists all the available inspection programs and the exact position the part should be placed on the machine table for inspection, giving operators the confidence to perform measurement tasks in just a few clicks. It greatly enhances flexibility and opens-up the system for use by non-specialist CMM operators. Measured results and automatically generated reports may be shared between screens, tablets and other networked devices for easy access and viewing from any location. Click here to read more!
From medical packing machines to plastic injection consumables, LK Metrology CMMs are frequently used in a variety of settings for metal and plastic molding. Equipped with contact probing and non-contact laser scanners, our CMMs help manufacturers accurately inspect and troubleshoot the most fragile moulded components.
Contact us for more information about:
- Metal and plastic molded parts
- Plastic injection molded medical components
- Plastic injection molded medical consumables
Alltrista Plastics
Alltrista Plastics was looking to upgrade their existing CMMs because they had become inefficient at their Christchurch, UK factory. Specializing in plastic injection molding of devices typically found in the medical, pharmaceutical and nutraceutical industries, Alltrista decided to upgrade its quality room and ultimately decided on the installation of two ALTERA S 10.7.6 CMMs equipped with LK’s CAMIO software and PH10M motorized indexing heads with SP25M scanning probes.
“What finally clinched our decision to opt for LK were the knowledgeable sales engineers, the firm’s reputation for good after-sales service and the favorable price of the equipment,” states Peter Makosa, Quality Manager at Alltrista Plastics. Click below to download and read the case study on how LK Metrology and Alltrista Plastics have teamed up for success!
Energy And Power
The energy production, transformation and transportation sectors cannot function without critical components meeting stringent quality standards. LK Metrology provides solutions for the precise dimensional inspection of critical components including parts used in wind power generation towers, turbine blades, turbo chargers, impellers, hydraulic pumps, compressor screws…
LK Metrology CMMs are used by power generation component manufacturers to inspect gas-fuelled turbines, steam turbines, various machinery and steel die forgings. Used in both manufacturing and R&D settings, our CMMs feature contact and non-contact probing options that ensure high accuracy, speed, and flexibility.
Our CMM systems can work as standalone, rapidly reprogrammable R&D/reverse engineering units or be integrated into fully automated Industry 4.0 production lines with robot loading and data analytics.
Contact us for more information about:
- Gas Fuelled Turbines
- Steam Turbines
- Turbine Castings Machining
- Steel Die Forgings
Cross Manufacturing
CMM controller Retrofit from LK Metrology enables multi-sensor inspection.
Two coordinate measuring machines built by LK Metrology in 1997 and 2007 for Cross Manufacturing, were upgraded by retrofitting multi-wired NMC300 controllers with updated firmware and software. Because of the scope of the project, two Renishaw PH10MQ probe heads were fitted to take advantage of the ability to deploy different types of sensors in addition to touch-trigger probes.
As a result of the improvements, the sealing design and manufacturing specialist has immediately gained the ability to use the Renishaw SP25M tactile scanning probe it has purchased, which it is hoped will cut metrology cycle times by at least one-third when implemented in early 2024. To read more about Cross Manufacturing and LK Metrology teaming up for success, click the link below or click the button below to download the case study!
Electronics
LK Metrology’s deep expertise in electronics led to the development of the first computer-controlled CMM, the first microprocessor-controlled drive system, the industry’s first touch trigger sensor (with Renishaw), and subsequently the first software-controlled CMMs. With over 60 years of experience in manufacturing precision measurement tools, LK Metrology assists semiconductor and consumer electronics manufacturers in resolving the most complex metrology challenges.
LK Metrology coordinate measurement machines are being used throughout the consumer electronics sector to measure components for audio and telecommunications systems, displays, smartphones, luxury watches, camera lenses, and household electronic appliances.
We provide a full range of metrology solutions including:
- Non-contact laser scanning for fragile parts/materials
- Accurate multi-sensor metrology. Example: touch probes are used for internal features, cross scanners for surface features and cross scanners in single-line-mode for high-speed surface scanning
- Measurement of multiple features in a single scan
Automotive & Land Transportation
LK Metrology is a high-accuracy precision measurement solution provider for major automotive and land transportation OEMs. Our legacy includes the design, production, and delivery of the world’s largest moving bridge CMM and the world’s first horizontal arm CMM. From powertrain to sheet-metal applications, our metrology solutions are used throughout the industry to ensure safety and quality standards are met.
With 50+ years of metrology experience in the automotive sector, LK Metrology offers a wide range of solutions to accurately measure sheet-metal panels, part assemblies, sub-assemblies, holes, gaps and slots.
Our CMMs can operate independently or fully integrated in automated production lines to gather and process surface data in contact, non-contact and combined modes. Collected data can then be visually compared with CAD models to provide insight on measured surfaces and geometry deviations.
Contact us for more information about:
- Automotive flush & gap
- Automotive plastic injection moulding components
- Interior & exterior automotive trim
- Automotive trim & plastic components
- Body-in-white inspection
- Automotive panels tooling & forming inspection
- Blow moulded plastic fuel systems
- Fragile automotive parts
- Core component inspection
- BIW inspection & virtual assembly
- Automated automotive inspection
Lotus
The most accurate Lotus car ever, thanks to cutting edge metrology.
The latest sports car, the Emira, is by far the most accurate model ever built by Lotus thanks to an upgrade in quality control at the company’s sports car factory in Hethel, Norfolk, UK. The 5-axis HC-90TR twin arm CMM provided by LK Metrology allows for non-contact dimensional inspection at production-line speed, enabling real-time quality control. The CMM completes automated measuring cycles so quickly that it is able to keep up with the production line. To learn more about how Lotus and LK Metrology have teamed up for success, click below to read or download the full case study!
Read the Lotus case study here!
LK Metrology CMMs are equipped with ceramic tables to improve stability, stiffness, weight, and thermal properties.
Our CMMs can also be equipped with a wide range of contact and non-contact sensors to measure engine and transmission components, geometrical parts, suspensions, wheels, and other components with strict dimensional and form tolerances.
Our accompanying software allow users to process measured data and display graphic CAD-to-component comparisons for visual deviation analysis.
Contact us for more information about:
- Pressure die cast transmission casings
- Automotive transmission gearbox & casing
- High performance engine, gearbox & suspension components
- Automotive turbo chargers
- Automotive wheel & engine sensors
- Castings machining
- Automotive electrical motors
- Automotive closing systems
- Automotive engine & transmission pumps
Driven Precision Engineering
Driven Precision Engineering LTD, a subcontract company that is involved in Formula 1 racing and other sectors such as the aerospace and automotive industries, decided to purchase an ALTERA C 10.7.7 from LK Metrology to improve component inspection procedures and quality reports. Typical components, all machined from solid aluminum, include race car wheels, impellers, aircraft fuel pumps, and much more.
Owner Ray Harris states, “LK seems to be one of the metrology industry’s best-kept secrets,” and “I got the impression that I would receive good support and back-up, which so far has been the case. In addition, the CMM is well-built, and the software provided is easy to use, including on the portable arm.”
AUTOMATION
Ever since the integration of the first electronics and IT solutions into production lines in the 1970s, manufacturers have been working towards achieving higher levels of efficiency through process automation. Industry 4.0 builds on this trend by leveraging the vast amounts of data that can be captured and processed on a production line. LK Metrology’s precision measurement solutions are designed with automation in mind. Our CMM systems gather and process measurement data to ensure optimum productivity. product quality and resource utilization.
Our in-line metrology solutions help manufacturers achieve high levels of automated quality, productivity, and efficiency. Our CMMs are designed to inspect components and determine corrective actions 24 hours per day without the need for a CMM operator.
Our systems can integrate with the following:
- CNC machine tools
- Transfer systems
- Robot handlers
- Programmable Logic Controllers (PLC)
- Material planning
- Safety systems
- Wash plants
LK Metrology CMMs and software are suited to semi-automated production lines where user input is required to initiate the measurement sequence. Our systems are equipped with various personnel presence detection devices and other safety equipment to ensure safety while the CMM is being used. Our CMMs can also be fitted with pallet systems for quick and easy loading/unloading of components and automatic part recognition. Beyond the CMM’s main monitor, users can also be alerted via text message, PC dashboard, wireless, visual, and audio alerts to ensure they are always informed of the status of their CMM.
Have a question?
If you have any questions about our products or services, or would like to book a demonstration, don't hesitate to get in touch with our LK Metrology US office using this form.
